Beer Fittings  There are no products in this category.

Subcategories

• 

  Short Weld Ferrules - 14WMP

  A short weld ferrule is a ring or cap, typically a metal one, that strengthens the end of a handle, stick, or tube and prevents it from splitting or wearing. The outer diameter is available up to 4" inches. The short weld ferrule differs from the long weld ferrule in that there is spacing at the end of your beer hose assembly. When working in area where space is at a premium, the short weld ferrule is the preferred choice when constructing an assembly. 

• 

  Long Weld Ferrules - L14AM7

  A long weld ferrule is a ring or cap, typically a metal one, that strengthens the end of a handle, stick, or tube and prevents it from splitting or wearing and provides addition length on your assembly. The outer diameter is available up to 4" inches. The long weld ferrule differs from the short weld ferrule in that there is spacing at the end of your beer hose assembly. When working in area where space is not limited, the long weld ferrule is the preferred choice when constructing an assembly. All ferrules come in 304 SS or 316 SS.

• 

  Solid End Caps - 16AMP

  Solid end caps function as termination point for a hose assembly. They are available in up to 4 inches. They are constructed of 304 SS and 316 SS and meets 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Male NPT Adapters - 21MP

  Male NPT Adapters is end fitting for your beer hose assembly. American National Standard Pipe Thread standards, often called national pipe thread standards for short, are U.S. national technical standards for screw threads used on threaded pipes and pipe fittings. They include both tapered and straight thread series for various purposes including rigidity, pressure-tight sealing, or both. Our Male NPT fittings come in 1/2 inch to 4 inch outer diameter.

• 

  Female NPT Adapters - 22MP

  Female NPT Adapters is end fitting for your beer hose assembly. American National Standard Pipe Thread standards, often called national pipe thread standards for short, are U.S. national technical standards for screw threads used on threaded pipes and pipe fittings. They include both tapered and straight thread series for various purposes including rigidity, pressure-tight sealing, or both. Our Female NPT fittings come in 1/2 inch to 4 inch outer diameter.

• 

  90° Clamp Elbows - B2CMP

  90° Clamp elbows are sanitary fittings for handle corners and bends in assembled beer hose systems. Sanitary elbow fittings are constructed of 304 SS or 316 SS stainless steel and meet 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Clamp Tees - B7MP

  Sanitary clamp tees function as intersection point for a hose assemblies. They are available in up to 4 inches. The clamp tees are constructed of 304 SS and 316 SS and meets 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Clamp Concentric Reducers - B3114MP

  Clamp Concentric Reducers function as connection between two connection with different outer diameters of two hose assemblies. They are available in up to 4 inches. The clamp tees are constructed of 304 SS and 316 SS and meets 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Clamp Laterals - B28AMP

  Clamp Laterals function as inline directional follow intersection allow one assembly to join another hose assembly. They are available in up to 4 inches. The clamp laterals are constructed of 304 SS and 316 SS and meets 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Clamp True Wyes - B28BMP

  Clamp True Wyes can handle working with two beer hose assemblies and a single assembly. The two assemblies merge or split with the single assembly. They are available in up to 4 inches. The clamp laterals are constructed of 304 SS and 316 SS and meets 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Clamp Crosses - B9MP

  Clamp True Wyes can handle working the crossing of four hose assemblies. The four assemblies intersect at cross point  with the assemblies meeting in the center of Wye. They are available in up to 4 inches. The clamp laterals are constructed of 304 SS and 316 SS and meets 3A standards. 3A Sanitary Standards have been developed for a variety of equipment. The founding organizations of 3A represent equipment manufacturers, processors, and regulatory officials. 3-A Sanitary Standards may also be required under many state and local regulations. 

• 

  Clamp 180° Return Bends - B2WUMP

  These Buttweld 180 Degree Weld Fittings are manufactured to very high tolerances via hydroforming. Hydroforming results in a more uniform fitting that is easier to weld and polish. This manufacturing method allows us to supply a superior quality fitting regardless of the application. Suitable for use in applications ranging from food and beverage, dairy, and pharmaceutical to marine and automotive.

  These fittings have earned the 3A symbol, which requires an annual assessment to make certain each product conforms in all respects to the published standard. The 3A Sanitary Standard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. The standard, collaboratively developed by a group of processors, suppliers, regulatory officials, and sanitation specialists, is generally accepted by federal, state and local regulatory authorities.

• 

  Brewery Hose Barbs & Rubber Hose Adapter - 14MPHR

  This Dixon 14MPHR-G Series sanitary rubber hose adapter is made of type 304 stainless steel and connects two rubber hoses. The most common sizes are the 1 inch rubber hose adapter and 2 inch rubber hose adapter. It has a barbed end to create a tight seal on the inside diameter (ID) of a hose when used with a clamp (not included) and an end to connect to the outside diameter (OD) of a hose on the other. It is made of type 304 stainless steel for corrosion resistance. This sanitary hose adapter is for use with rubber hoses in the food, dairy, and beverage industries.

  Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.