1" Plicord Distillery 150 Bulk Hose

241 inch distillery 150 hose in bulk may customized to any length. The 1 inch hose is a large capacity hose that can allow the moving of large volumes of fluid. This hose can be paired with pump or be gravity feed to assist with transfers between holding tanks. Meeting both FDA and 3A compliance ensures your hose will meet industry standards.

Application: 
Transfer of high proof alcohol and other liquids (ex. Whiskey, Vodka) through a 1 inch hose assembly.

Construction:  N/A

Tube: UHMWPE (FDA/USDA and 3A compliant, NSF 61 listed material)

3A: Compliance with FDA regulations in CFR Title 21, Part 177.2600 is a primary requisite of the 3-A Standard. FDA specifies the permitted "ingredients" for food grade rubbers, that is, the natural and/or synthetic polymers and the adjuvant substances (e.g. vulcanization materials, antioxidants, plasticizers, fillers, colorants, etc.). The 3-A Sanitary Standard specifies additional performance requirements to establish acceptance for these applications. Specifically, the materials must meet requirements for compatibility with cleaning and sanitizing agents under accelerated use-simulating conditions. These tests are intended to evaluate the rubber physical properties and to assess performance of the rubber under accelerated simulated dairy product contact and cleaning conditions. The specified laboratory testing concerns milk fat absorption, air aging stability, and tests for compatibility with cleaning and sanitizing agents.

Cover: Corrugated Grey EPDM (wrapped impression) 

Reinforcement: Spiral-plied fabrics with double galvanized wire helix

Max. Alcohol Concentrate: 100% per volume

Temperature Range: -40˚F to 212˚F (-40˚C to 100˚C)

Branding: CONTINENTAL CONTITECH PLICORD DISTILLERY 150 PSI WP FDA 3-A & USDA

EPDM: EPDM rubber (ethylene propylene diene monomer (M-class) rubber),[1][2][3] a type of synthetic rubber, is an elastomer characterized by a wide range of applications. The M refers to its classification in ASTM standard D-1418; the M class includes rubbers having a saturated chain of the polymethylene type. Dienes currently used in the manufacture of EPDM rubbers are dicyclopentadiene (DCPD), ethylidene norbornene (ENB), and vinyl norbornene (VNB). EPDM rubber is closely related to ethylene propylene rubber: ethylene propylene rubber is a copolymer of ethylene and propylene, whereas EPDM rubber is a terpolymer of ethylene, propylene, and a diene-component.